No products in the cart.
Window Film Static Glass Sticker
Roll over image to zoom in
30.00৳
Design : Choose your Customize,
Easy to cut any size to meet your demands.
Color and looks as same as picture.
Facility – Extra Washable & Waterproof.
#Cutting_Wall_Glass #Spider_Glass_Partition #Euro_Model_Glass #Double_Glazing_Glass
#U_Channel_Glass_Partition #Gypsum_Board_Ceiling #Mineral_Ceiling_Board
#Metal_Board_Ceiling #PVC_Ceiling_Board #Glass_Door #Hanging_Door
#Hinge_Door #Folding_Door #Hanging_Folding_Door #Shower_Door #Shower_Hinges_Door
#Hanging_Roller_Door #Sliding_Door #Sliding_Window #Protractor_Thai_Glass_Partition
#Glass_Patision #Silling_Window #Office_Patision #Textile_Section #Curtain_Wall_Section
Window Film Static Glass Sticker
- Clean the Surface: Before applying the film, make sure the glass surface is clean and free from any dust, dirt, or residue. Use a glass cleaner and a lint-free cloth to ensure a smooth application. Window Film Static Glass Sticker
- Measure and Cut: Measure the dimensions of the window accurately and cut the film to the appropriate size. It’s a good idea to leave a small margin around the edges for a neater finish.
- Wet the Glass: Spray a mixture of water and a few drops of dish soap onto the glass. This will help the film adhere smoothly and allow you to adjust its position.
- Peel and Stick: Peel off the backing of the static film and carefully apply it to the wet glass surface. Position it as desired, making sure it is straight and even.
- Smooth Out Air Bubbles: Use a squeegee or a similar flat tool to gently push out any air bubbles trapped between the film and the glass. Start from the center and work your way towards the edges.
Window Film Static Glass Sticker
- Reposition if Needed: Because it’s static cling, you can peel off and reposition the film if you’re not satisfied with the placement. Just make sure the glass is still wet.
- Trim Excess Film: If there’s any excess film around the edges, carefully trim it with a sharp utility knife. Be cautious to avoid scratching the glass.
- Allow to Dry: Let the film dry in place. This may take some time, depending on the specific product and the humidity levels in your environment.
- Maintenance: Clean the film with non-abrasive cleaners when needed. Avoid using harsh chemicals that could damage the film.
- Removal: To remove the film, gently peel it off from one corner. If there is any residue left on the glass, it can usually be wiped away with a glass cleaner.
Design : Choose your Customize,
Easy to cut any size to meet your demands.
Color and looks as same as picture.
Facility – Extra Washable & Waterproof.
#Cutting_Wall_Glass #Spider_Glass_Partition #Euro_Model_Glass #Double_Glazing_Glass
#U_Channel_Glass_Partition #Gypsum_Board_Ceiling #Mineral_Ceiling_Board
#Metal_Board_Ceiling #PVC_Ceiling_Board #Glass_Door #Hanging_Door
#Hinge_Door #Folding_Door #Hanging_Folding_Door #Shower_Door #Shower_Hinges_Door
#Hanging_Roller_Door #Sliding_Door #Sliding_Window #Protractor_Thai_Glass_Partition
#Glass_Patision #Silling_Window #Office_Patision #Textile_Section #Curtain_Wall_Section
- 300.00৳
500.00৳X Banner Stand 2fit width x 5fit height Aluminium and Plastic
300.00৳500.00৳
Reviews
There are no reviews yet.